Previous Next

ESAB

FILARC 76S

Inquire about this product
FILARC 76S

CTOD-tested, all-positional, basic AC/DC electrode with 100% recovery for offshore fabrication (diameter 4.0 and 5.0 mm 115%). Alloyed with max 1%Ni. Good CVN toughness down to -60°C. CTOD tested in the AW and SR conditions. BS4360-50D steel and similar grades. Satisfactory CTOD results eliminate stress relieving for joints up to approx. 50 mm plate thickness. Many approved welding procedures available. Use short arc. Weave slowly when permitted. DC+. Use DC- for root passes.

Add to shopping list


Specifications


Typical Tensile Properties

ISO As welded
Elongation Tensile Strength Yield Strength
28 % 630 MPa 550 MPa
AWS As welded
Elongation Tensile Strength Yield Strength
- - -

Typical Charpy V-Notch Properties

ISO As welded
Impact Value Testing Temperature
110 J -40 °C
75 J -60 °C

Typical Weld Metal Analysis %

MnMoCSiNiCr
1.58 %0.01 %0.05 %0.36 %0.87 %0.04 %

Approvals: ABS, 3Y H5, BV, 3Y H5, CE, EN 13479, DNV-GL, 3 YH5, LR, 5Y42 H5, Seproz, UNA 272581
Classifications: SFA/AWS A5.5, E7018-G, EN ISO 2560-A, E 46 6 Mn1Ni B 32 H5

Approvals are based on factory location. Please contact ESAB for more information.


Alloy Type: Low alloyed (0.9 % Ni)
Coating Type: IMPERIAL_Basic covering
Diffusible Hydrogen: < 5.0 ml/100g
Welding Current: AC, DC+-
x
×
x
x

x

Loading..