Previous Next

ESAB

FILARC PZ6138S SR

FILARC PZ6138S SR

An all-positional rutile cored wire for use with C1 providing very good toughness down to -60°C after stress relieving. Diameters less than 1.4 mm are all-positional except vertical down.

Add to shopping list


Specifications


Typical Tensile Properties

C1 Shielding gas Stress relieved
Elongation Stress Relieved Temperature Stress Relieved Testing Time Tensile Strength Yield Strength
25 % 600 °C 2 hr 560 MPa 480 MPa
C1 shielding gas As welded
Elongation Stress Relieved Temperature Stress Relieved Testing Time Tensile Strength Yield Strength
28 % - - 579 MPa 498 MPa

Typical Charpy V-Notch Properties

C1 Shielding gas Stress relieved
Impact Value Stress Relieved Testing Temp Stress Relieved Testing Time Testing Temperature
83 J 600 °C 2 hr -60 °C
C1 shielding gas As welded
Impact Value Stress Relieved Testing Temp Stress Relieved Testing Time Testing Temperature
90 J - - -60 °C

Typical Weld Metal Analysis %

C1 Shielding gas
MnCSiNi
1.20 %0.05 %0.30 %0.90 %

Approvals: ABS, 5Y42M H5, ABS, 5Y46M H5, BV, 5Y42 H5 (C1), BV, 5Y46 H5 (C1), DNV, V Y42MS (H5) (C1), DNV, V Y46MS (H5) (C1), GL, 5Y42H5S (stress relieved), GL, 5Y46H5S (as welded)
Classifications: SFA/AWS A5.29, E81T1-Ni1C J, Weld Metal, SFA/AWS A5.36, E71T1-C1P8-Ni1, Weld Metal, SFA/AWS A5.36, E81T1-C1A8-Ni1, Weld Metal, EN ISO 17632-A, T 46 6 1Ni P C 1 H5, Weld Metal

Approvals are based on factory location. Please contact ESAB for more information.


Alloy Type: Low alloy
Welding Current: DC+
x
×
x
x

x

Loading..