Stoody PC2009


Stoody PC2009

The following items have been added to your list


Stoody PC2009 is a chromium carbide wire designed specifically for the application of abrasion resistant deposits inside pipe. The alloy is optimized to result in superior weldability for overlaying pipe ID in the flat position and elbows in the horizontal position. Stoody PC2009 can be used in hot wear applications up to 900°F (482°C).


  • Designed specifically for pipe and elbow ID cladding
  • The alloy can be used in hot wear applications up to 900°F (482°C)

Stoody PC2009


Typical Tensile Properties

Deposition Data

Current 450-500 A
Deposition Type 3
Diameter 7/64 in.
Diameter 2.8 mm
TTW Dist. 1-1 1/4 in.
TTW Dist. 25-32 mm
Voltage 28-29 V
Wire Feed Speed 180-220 in./min
Wire Feed Speed 457-559 cm/min

Typical Weld Metal Analysis %

C Cr Fe Other
5.5 % 27 % BAL % 2.5 %

How to purchase Stoody PC2009

We're as eager to put ESAB gear in your hands as you are to have it.  That's why we sell our products with distributors who'll give you the attention, support, and value you deserve.  Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.

To make things even easier, we've developed the online shopping list below.  As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet.  And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site.  Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.

Part Numbers and Accessories