OK Tubrodur 55 O A
OK Tubrodur 55 O A is a self-shielded, Cr-carbide type flux-cored wire. The weld metal is extremely resistant to abrasive wear by gritty fine grain materials such as earth, ore, clay, etc. Typical applications are the hardfacing of bucket lips, auger points, mining and earthmoving equipment, scraper blades etc. Maximum 2-3 layers should be deposited.
|Deposition Rate||2.4-6.8 kg/h|
|Wire Feed Speed||5.0-12.6 m/min|
|Grade||T Z Fe14|
|Alloy Type||Carbide-rich steel weld metal|
Typical Weld Metal Analysis %
|Typical Weld Metal Analysis %|
|3.6 %||22.5 %||0.88 %||3.5 %||0.53 %||0.5 %|
How to purchase OK Tubrodur 55 O A
We're as eager to put ESAB gear in your hands as you are to have it. That's why we sell our products with distributors who'll give you the attention, support, and value you deserve. Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.
To make things even easier, we've developed the online shopping list below. As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet. And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.