OK Tigrod 1070

The following items have been added to your list


OK Tigrod 1070 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and is used extensively in thin gauge and foil products. It has good welding characteristics. A desirable characteristic of the alloy is the bright finishes obtained by anodising. Non-Heat treatable.

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded33 %75 MPa (11 ksi)35 MPa (5 ksi)


Grade S Al 1070 (Al99,7)
Name EN ISO 18273

Consumable Characteristics

Alloy Type Al
Shielding Gas I1, I3 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al Cu Fe Mn Si V
99.80 % 0.01 % 0.13 % 0.01 % 0.02 % 0.01 %

How to purchase OK Tigrod 1070

We're as eager to put ESAB gear in your hands as you are to have it.  That's why we sell our products with distributors who'll give you the attention, support, and value you deserve.  Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.

To make things even easier, we've developed the online shopping list below.  As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet.  And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site.  Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.

Part Numbers and Accessories

Part Numbers : OK Tigrod 1070